Modul-o-box Analogue Synth Case

3D printable, scalable case for the Eurorack Modular Synthesizer

Eurorack fully compatible 3D printed case for housing of an analogue modular synthesizer. You can print just the required quantity of parts as you need to house the number of your modules. When your system grows, you can scale up your case easily by printing additional modules.

Modular case for modular synth

Standardized 3D printable parts can be combined into a case of any size and are always compatible with the Euro rack system.

Growing along with your module count.

When you start your modular synth build up, you can print parts for a base one level case or even smaller. In time when your synth grows with more modules, you just 3D print new parts to enlarge your case. Simple, no need to purchase another new case, just enlarge the one you already have.

Efficient and cost effective.

Protective

Protect your synth against dust and mechanical damage using Modul-o-box lid.

Compatible

Modul-o-box is Doepfer DIY kit ready case. Trafo + power board fits nicely.

Any standard 3D printer

will make it!

All Modul-o-box parts are constructed with the printing dimensions of the standard 3D printer in mind. Therefore, any ordinary 3D printer can produce a complete case of any size. It does not matter if you have Prusa MK3, Ender 3 or any other no name printer, they will all do the job. Also the choice of colors is up to your creativity. We like grey combined with red, but you can print in whatever colour you prefer.

Scale your Modul-o-box as you need

Needed parts for assembly of each size

  • 2x / A130_1.stl
  • 2x / A130_2.stl
  • 4x / A130_3.stl
  • 0x / A130_4.stl
  • 6x / C1.stl
  • 3x / D1-D2.stl
  • 2x / A130_1.stl
  • 2x / A130_2.stl
  • 4x / A130_3.stl
  • 2x / A130_4.stl
  • 9x / C1.stl
  • 6x / D1-D5.stl
  • 2x / A130_1.stl
  • 2x / A130_2.stl
  • 4x / A130_3.stl
  • 4x / A130_4.stl
  • 12x / C1.stl
  • 9x / D1-D5.stl

How to put together

Just 5-part types are needed

to produce the basic Modul-o-box

Our case is constructed to be as simple as possible while maintaining strict precision. With just 5 basic part types you can build a case of any size long and it will always maintain the exact dimensions of the Eurorack standard. Add an additional 4 part types, and your case can expand to be virtually any size. There are other features available that will provide different levels of customisation, but it takes just 5 core parts to get you started.

Example:

A case for 1 x 84 HP, you will need 4 corners, 4 horizontals and 3 back plates. Then 6 rails connected together will finish your module ready case. An additional amount of similar but shallower parts along with 4 to 8 clips are all that’s needed if you want have lid for your synth.

That’s it!

Ready for know components.

While Modul-o-box case is highly customisable for any power system, we primary use the proven Doepfer Power Kit.

GET DOEPFER DIY POWER KIT

Let´s discuss sustainable culture.

Using the Modul-o-box system is one of most ecologically friendly ways to house your components. Always printing just the size of case that is needed reduces the amount of material used and waste. When you require a larger box, you just print out a few additional parts and easily enlarge your Modul-o-box. Should any of the parts become broken or damaged, there is no need to replace the entire unit, just print out a new replacement part and your box will be good as new. And did we say that PLA is biodegradable? Yes... we know you know. Printing from corn plastic reduces environmental waste and benefits our planet. Also, don´t forget, 3D printing is one of the most energy efficient technologies today. So lets go!

Don´t wait for delivery, dowload it now

Its simple. Just buy access and you can build yor modular case starting in few minutes from now.

Only 17.46 €

30 days of unlimited downloads

GET DOWNLOAD ACCESS